INTRODUKSJON TIL DISJOINT SETT (UNION-FIND ALGORITHM)

Hva er en disjoint sett datastruktur?

To sett kalles usammenhengende sett hvis de ikke har noe element til felles, er skjæringspunktet mellom sett et nullsett.

En datastruktur som lagrer ikke-overlappende eller usammenhengende delsett av elementer kalles usammenhengende datastruktur. Den usammenhengende datastrukturen støtter følgende operasjoner:

Legger til nye sett til det usammenhengende settet.
Slå sammen usammenhengende sett til et enkelt usammenhengende sett ved å bruke Union operasjon.
Finne representant for et usammenhengende sett ved hjelp av Finne operasjon.
Sjekk om to sett er usammenhengende eller ikke.

Vurder en situasjon med flere personer og følgende oppgaver som skal utføres på dem:

Legg til en nytt vennskap forhold , dvs. en person x blir venn med en annen person, dvs. legger til nytt element til et sett.
Finn om individuelle x er en venn av individ y (direkte eller indirekte venn)

Eksempler:

Vi får 10 individer si, a, b, c, d, e, f, g, h, i, j

Følgende er relasjoner som skal legges til:
a b
b d
c f
c i
j e
g j

Gitt spørsmål som om a er en venn av d eller ikke. Vi trenger i utgangspunktet å opprette følgende 4 grupper og opprettholde en raskt tilgjengelig forbindelse mellom gruppeelementer:
G1 = {a, b, d}
G2 = {c, f, i}
G3 = {e,g,j}
G4 = {t}

Finn om x og y tilhører samme gruppe eller ikke, dvs. for å finne om x og y er direkte/indirekte venner.

Deling av individene i forskjellige sett i henhold til gruppene de faller i. Denne metoden er kjent som en Usammenhengende sett Union som opprettholder en samling av Usammenhengende sett og hvert sett er representert av ett av medlemmene.

For å svare på spørsmålet ovenfor er to hovedpunkter å vurdere:

Hvordan løse sett? I utgangspunktet tilhører alle elementer forskjellige sett. Etter å ha jobbet med de gitte relasjonene velger vi et medlem som representant . Det kan være mange måter å velge en representant på, en enkel er å velge med den største indeksen.
Sjekk om 2 personer er i samme gruppe? Hvis representanter for to individer er like, vil de bli venner.

Datastrukturer som brukes er:

Matrise: En rekke heltall kalles Foreldre[] . Hvis vi har å gjøre med N elementer, representerer det i'te elementet i matrisen det i'te elementet. Mer presist er det i’te elementet i overordnet[]-matrisen overordnet til det i’te elementet. Disse relasjonene skaper ett eller flere virtuelle trær.

Tre: Det er en Usammenhengende sett . Hvis to elementer er i samme tre, er de i det samme Usammenhengende sett . Rotnoden (eller den øverste noden) til hvert tre kalles representant av settet. Det er alltid en singel unik representant av hvert sett. En enkel regel for å identifisere en representant er hvis 'i' er representanten for et sett, da Foreldre[i] = i . Hvis jeg ikke er representanten for settet hans, kan det bli funnet ved å reise opp i treet til vi finner representanten.

Operasjoner på usammenhengende datastrukturer:

Finne
Union

1. Finn:

Kan implementeres ved rekursivt å krysse overordnet array til vi treffer en node som er overordnet til seg selv.

C++

// Finds the representative of the set> // that i is an element of> > #include> using> namespace> std;> > int> find(>int> i)> > {> > >// If i is the parent of itself> >if> (parent[i] == i) {> > >// Then i is the representative of> >// this set> >return> i;> >}> >else> {> > >// Else if i is not the parent of> >// itself, then i is not the> >// representative of his set. So we> >// recursively call Find on its parent> >return> find(parent[i]);> >}> }> > // The code is contributed by Nidhi goel>

Java

// Finds the representative of the set> // that i is an element of> import> java.io.*;> > class> GFG {> > >static> int> find(>int> i)> > >{> > >// If i is the parent of itself> >if> (parent[i] == i) {> > >// Then i is the representative of> >// this set> >return> i;> >}> >else> {> > >// Else if i is not the parent of> >// itself, then i is not the> >// representative of his set. So we> >// recursively call Find on its parent> >return> find(parent[i]);> >}> >}> }> > // The code is contributed by Nidhi goel>

Python3

# Finds the representative of the set> # that i is an element of> > def> find(i):> > ># If i is the parent of itself> >if> (parent[i]>=>=> i):> > ># Then i is the representative of> ># this set> >return> i> >else>:> > ># Else if i is not the parent of> ># itself, then i is not the> ># representative of his set. So we> ># recursively call Find on its parent> >return> find(parent[i])> > ># The code is contributed by Nidhi goel>

C#

using> System;> > public> class> GFG{> > >// Finds the representative of the set> >// that i is an element of> >public> static> int> find(>int> i)> >{> > >// If i is the parent of itself> >if> (parent[i] == i) {> > >// Then i is the representative of> >// this set> >return> i;> >}> >else> {> > >// Else if i is not the parent of> >// itself, then i is not the> >// representative of his set. So we> >// recursively call Find on its parent> >return> find(parent[i]);> >}> >}> }>

Javascript

> // Finds the representative of the set> // that i is an element of> > function> find(i)> {> > >// If i is the parent of itself> >if> (parent[i] == i) {> > >// Then i is the representative of> >// this set> >return> i;> >}> >else> {> > >// Else if i is not the parent of> >// itself, then i is not the> >// representative of his set. So we> >// recursively call Find on its parent> >return> find(parent[i]);> >}> }> // The code is contributed by Nidhi goel> >

Tidskompleksitet : Denne tilnærmingen er ineffektiv og kan i verste fall ta O(n) tid.

2. Union:

Det tar to elementer som input og finner representantene for settene deres ved hjelp av Finne operasjon, og til slutt plasserer ett av trærne (som representerer settet) under rotnoden til det andre treet.

C++

// Unites the set that includes i> // and the set that includes j> > #include> using> namespace> std;> > void> union>(>int> i,>int> j) {> > >// Find the representatives> >// (or the root nodes) for the set> >// that includes i> >int> irep =>this>.Find(i),> > >// And do the same for the set> >// that includes j> >int> jrep =>this>.Find(j);> > >// Make the parent of i’s representative> >// be j’s representative effectively> >// moving all of i’s set into j’s set)> >this>.Parent[irep] = jrep;> }>

Java

import> java.util.Arrays;> > public> class> UnionFind {> >private> int>[] parent;> > >public> UnionFind(>int> size) {> >// Initialize the parent array with each element as its own representative> >parent =>new> int>[size];> >for> (>int> i =>0>

; i   parent[i] = i;   }   }     // Find the representative (root) of the set that includes element i   public int find(int i) {   if (parent[i] == i) {   return i; // i is the representative of its own set   }   // Recursively find the representative of the parent until reaching the root   parent[i] = find(parent[i]); // Path compression   return parent[i];   }     // Unite (merge) the set that includes element i and the set that includes element j   public void union(int i, int j) {   int irep = find(i); // Find the representative of set containing i   int jrep = find(j); // Find the representative of set containing j     // Make the representative of i's set be the representative of j's set   parent[irep] = jrep;   }     public static void main(String[] args) {   int size = 5; // Replace with your desired size   UnionFind uf = new UnionFind(size);     // Perform union operations as needed   uf.union(1, 2);   uf.union(3, 4);     // Check if elements are in the same set   boolean inSameSet = uf.find(1) == uf.find(2);   System.out.println('Are 1 and 2 in the same set? ' + inSameSet);   }  }>

Python3

# Unites the set that includes i> # and the set that includes j> > def> union(parent, rank, i, j):> ># Find the representatives> ># (or the root nodes) for the set> ># that includes i> >irep>=> find(parent, i)> > ># And do the same for the set> ># that includes j> >jrep>=> find(parent, j)> > ># Make the parent of i’s representative> ># be j’s representative effectively> ># moving all of i’s set into j’s set)> > >parent[irep]>=> jrep>

C#

using> System;> > public> class> UnionFind> {> >private> int>[] parent;> > >public> UnionFind(>int> size)> >{> >// Initialize the parent array with each element as its own representative> >parent =>new> int>[size];> >for> (>int>

i = 0; i   {   parent[i] = i;   }   }     // Find the representative (root) of the set that includes element i   public int Find(int i)   {   if (parent[i] == i)   {   return i; // i is the representative of its own set   }   // Recursively find the representative of the parent until reaching the root   parent[i] = Find(parent[i]); // Path compression   return parent[i];   }     // Unite (merge) the set that includes element i and the set that includes element j   public void Union(int i, int j)   {   int irep = Find(i); // Find the representative of set containing i   int jrep = Find(j); // Find the representative of set containing j     // Make the representative of i's set be the representative of j's set   parent[irep] = jrep;   }     public static void Main()   {   int size = 5; // Replace with your desired size   UnionFind uf = new UnionFind(size);     // Perform union operations as needed   uf.Union(1, 2);   uf.Union(3, 4);     // Check if elements are in the same set   bool inSameSet = uf.Find(1) == uf.Find(2);   Console.WriteLine('Are 1 and 2 in the same set? ' + inSameSet);   }  }>

Javascript

// JavaScript code for the approach> > // Unites the set that includes i> // and the set that includes j> function> union(parent, rank, i, j)> {> > // Find the representatives> // (or the root nodes) for the set> // that includes i> let irep = find(parent, i);> > // And do the same for the set> // that includes j> let jrep = find(parent, j);> > // Make the parent of i’s representative> // be j’s representative effectively> // moving all of i’s set into j’s set)> > parent[irep] = jrep;> }>

Tidskompleksitet : Denne tilnærmingen er ineffektiv og kan i verste fall føre til tre med lengde O(n).

Optimaliseringer (sammenslåing etter rangering/størrelse og banekomprimering):

Effektiviteten avhenger sterkt av hvilket tre som fester seg til det andre . Det er 2 måter det kan gjøres på. Først er Union etter rang, som vurderer høyden på treet som faktoren og andre er Union etter størrelse, som vurderer størrelsen på treet som faktoren mens det ene treet festes til det andre. Denne metoden sammen med Path Compression gir kompleksitet på nesten konstant tid.

Banekomprimering (Endringer for å finne()):

Det øker hastigheten på datastrukturen med komprimere høyden av trærne. Det kan oppnås ved å sette inn en liten hurtigbuffermekanisme i Finne operasjon. Ta en titt på koden for flere detaljer:

C++

// Finds the representative of the set that i> // is an element of.> > #include> using> namespace> std;> > int> find(>int> i)> {> > >// If i is the parent of itself> >if> (Parent[i] == i) {> > >// Then i is the representative> >return> i;> >}> >else> {> > >// Recursively find the representative.> >int> result = find(Parent[i]);> > >// We cache the result by moving i’s node> >// directly under the representative of this> >// set> >Parent[i] = result;> > >// And then we return the result> >return> result;> >}> }>

Java

// Finds the representative of the set that i> // is an element of.> import> java.io.*;> import> java.util.*;> > static> int> find(>int> i)> {> > >// If i is the parent of itself> >if> (Parent[i] == i) {> > >// Then i is the representative> >return> i;> >}> >else> {> > >// Recursively find the representative.> >int> result = find(Parent[i]);> > >// We cache the result by moving i’s node> >// directly under the representative of this> >// set> >Parent[i] = result;> > >// And then we return the result> >return> result;> >}> }> > // The code is contributed by Arushi jindal.>

Python3

# Finds the representative of the set that i> # is an element of.> > > def> find(i):> > ># If i is the parent of itself> >if> Parent[i]>=>=> i:> > ># Then i is the representative> >return> i> >else>:> > ># Recursively find the representative.> >result>=> find(Parent[i])> > ># We cache the result by moving i’s node> ># directly under the representative of this> ># set> >Parent[i]>=> result> > ># And then we return the result> >return> result> > # The code is contributed by Arushi Jindal.>

C#

klasse vs objekt java

using> System;> > // Finds the representative of the set that i> // is an element of.> public> static> int> find(>int> i)> {> > >// If i is the parent of itself> >if> (Parent[i] == i) {> > >// Then i is the representative> >return> i;> >}> >else> {> > >// Recursively find the representative.> >int> result = find(Parent[i]);> > >// We cache the result by moving i’s node> >// directly under the representative of this> >// set> >Parent[i] = result;> > >// And then we return the result> >return> result;> >}> }> > // The code is contributed by Arushi Jindal.>

Javascript

// Finds the representative of the set that i> // is an element of.> > > function> find(i)> {> > >// If i is the parent of itself> >if> (Parent[i] == i) {> > >// Then i is the representative> >return> i;> >}> >else> {> > >// Recursively find the representative.> >let result = find(Parent[i]);> > >// We cache the result by moving i’s node> >// directly under the representative of this> >// set> >Parent[i] = result;> > >// And then we return the result> >return> result;> >}> }> > // The code is contributed by Arushi Jindal.>

Tidskompleksitet : O(log n) i gjennomsnitt per samtale.

Union etter rang :

Først av alt trenger vi en ny rekke heltall kalt rang[] . Størrelsen på denne matrisen er den samme som den overordnede matrisen Foreldre[] . Hvis jeg er en representant for et sett, rang[i] er høyden på treet som representerer settet.
Husk nå at i unionsoperasjonen spiller det ingen rolle hvilket av de to trærne som flyttes under det andre. Det vi nå vil gjøre er å minimere høyden på det resulterende treet. Hvis vi forener to trær (eller sett), la oss kalle dem venstre og høyre, så avhenger alt av rangering av venstre og rettighetsrangering .

Hvis rangeringen av venstre er mindre enn rangeringen av Ikke sant , da er det best å flytte venstre under høyre , fordi det ikke vil endre rangeringen til høyre (mens flytting til høyre under venstre vil øke høyden). På samme måte, hvis rangeringen til høyre er mindre enn rangeringen til venstre, bør vi flytte høyre under venstre.
Hvis rekkene er like, spiller det ingen rolle hvilket tre som går under det andre, men rangeringen av resultatet vil alltid være én høyere enn rangeringen av trærne.

C++

// Unites the set that includes i and the set> // that includes j by rank> > #include> using> namespace> std;> > void> unionbyrank(>int> i,>int> j) {> > >// Find the representatives (or the root nodes)> >// for the set that includes i> >int> irep =>this>.find(i);> > >// And do the same for the set that includes j> >int> jrep =>this>.Find(j);> > >// Elements are in same set, no need to> >// unite anything.> >if> (irep == jrep)> >return>;> > >// Get the rank of i’s tree> >irank = Rank[irep],> > >// Get the rank of j’s tree> >jrank = Rank[jrep];> > >// If i’s rank is less than j’s rank> >if>

(irank     // Then move i under j   this.parent[irep] = jrep;   }     // Else if j’s rank is less than i’s rank   else if (jrank     // Then move j under i   this.Parent[jrep] = irep;   }     // Else if their ranks are the same   else {     // Then move i under j (doesn’t matter   // which one goes where)   this.Parent[irep] = jrep;     // And increment the result tree’s   // rank by 1   Rank[jrep]++;   }  }>

Java

public> class> DisjointSet {> > >private> int>[] parent;> >private> int>[] rank;> > >// Constructor to initialize the DisjointSet data> >// structure> >public> DisjointSet(>int> size)> >{> >parent =>new> int>[size];> >rank =>new> int>[size];> > >// Initialize each element as a separate set with> >// rank 0> >for> (>int> i =>0>

; i   parent[i] = i;   rank[i] = 0;   }   }     // Function to find the representative (or the root   // node) of a set with path compression   private int find(int i)   {   if (parent[i] != i) {   parent[i] = find(parent[i]); // Path compression   }   return parent[i];   }     // Unites the set that includes i and the set that   // includes j by rank   public void unionByRank(int i, int j)   {   // Find the representatives (or the root nodes) for   // the set that includes i and j   int irep = find(i);   int jrep = find(j);     // Elements are in the same set, no need to unite   // anything   if (irep == jrep) {   return;   }     // Get the rank of i's tree   int irank = rank[irep];     // Get the rank of j's tree   int jrank = rank[jrep];     // If i's rank is less than j's rank   if (irank   // Move i under j   parent[irep] = jrep;   }   // Else if j's rank is less than i's rank   else if (jrank   // Move j under i   parent[jrep] = irep;   }   // Else if their ranks are the same   else {   // Move i under j (doesn't matter which one goes   // where)   parent[irep] = jrep;   // Increment the result tree's rank by 1   rank[jrep]++;   }   }     // Example usage   public static void main(String[] args)   {   int size = 5;   DisjointSet ds = new DisjointSet(size);     // Perform some union operations   ds.unionByRank(0, 1);   ds.unionByRank(2, 3);   ds.unionByRank(1, 3);     // Find the representative of each element and print   // the result   for (int i = 0; i   System.out.println(   'Element ' + i   + ' belongs to the set with representative '  + ds.find(i));   }   }  }>

Python3

class> DisjointSet:> >def> __init__(>self>, size):> >self>.parent>=> [i>for> i>in> range>(size)]> >self>.rank>=> [>0>]>*> size> > ># Function to find the representative (or the root node) of a set> >def> find(>self>, i):> ># If i is not the representative of its set, recursively find the representative> >if> self>.parent[i] !>=> i:> >self>.parent[i]>=> self>.find(>self>.parent[i])># Path compression> >return> self>.parent[i]> > ># Unites the set that includes i and the set that includes j by rank> >def> union_by_rank(>self>, i, j):> ># Find the representatives (or the root nodes) for the set that includes i and j> >irep>=> self>.find(i)> >jrep>=> self>.find(j)> > ># Elements are in the same set, no need to unite anything> >if> irep>=>=> jrep:> >return> > ># Get the rank of i's tree> >irank>=> self>.rank[irep]> > ># Get the rank of j's tree> >jrank>=> self>.rank[jrep]> > ># If i's rank is less than j's rank> >if>

irank   # Move i under j   self.parent[irep] = jrep   # Else if j's rank is less than i's rank   elif jrank   # Move j under i   self.parent[jrep] = irep   # Else if their ranks are the same   else:   # Move i under j (doesn't matter which one goes where)   self.parent[irep] = jrep   # Increment the result tree's rank by 1   self.rank[jrep] += 1    def main(self):   # Example usage   size = 5  ds = DisjointSet(size)     # Perform some union operations   ds.union_by_rank(0, 1)   ds.union_by_rank(2, 3)   ds.union_by_rank(1, 3)     # Find the representative of each element   for i in range(size):   print(f'Element {i} belongs to the set with representative {ds.find(i)}')      # Creating an instance and calling the main method  ds = DisjointSet(size=5)  ds.main()>

C#

using> System;> > class> DisjointSet {> >private> int>[] parent;> >private> int>[] rank;> > >public> DisjointSet(>int> size) {> >parent =>new> int>[size];> >rank =>new> int>[size];> > >// Initialize each element as a separate set> >for> (>int>

i = 0; i   parent[i] = i;   rank[i] = 0;   }   }     // Function to find the representative (or the root node) of a set   private int Find(int i) {   // If i is not the representative of its set, recursively find the representative   if (parent[i] != i) {   parent[i] = Find(parent[i]); // Path compression   }   return parent[i];   }     // Unites the set that includes i and the set that includes j by rank   public void UnionByRank(int i, int j) {   // Find the representatives (or the root nodes) for the set that includes i and j   int irep = Find(i);   int jrep = Find(j);     // Elements are in the same set, no need to unite anything   if (irep == jrep) {   return;   }     // Get the rank of i's tree   int irank = rank[irep];     // Get the rank of j's tree   int jrank = rank[jrep];     // If i's rank is less than j's rank   if (irank   // Move i under j   parent[irep] = jrep;   }   // Else if j's rank is less than i's rank   else if (jrank   // Move j under i   parent[jrep] = irep;   }   // Else if their ranks are the same   else {   // Move i under j (doesn't matter which one goes where)   parent[irep] = jrep;   // Increment the result tree's rank by 1   rank[jrep]++;   }   }     static void Main() {   // Example usage   int size = 5;   DisjointSet ds = new DisjointSet(size);     // Perform some union operations   ds.UnionByRank(0, 1);   ds.UnionByRank(2, 3);   ds.UnionByRank(1, 3);     // Find the representative of each element   for (int i = 0; i   Console.WriteLine('Element ' + i + ' belongs to the set with representative ' + ds.Find(i));   }   }  }>

Javascript

// JavaScript Program for the above approach> unionbyrank(i, j) {> let irep =>this>.find(i);>// Find representative of set including i> let jrep =>this>.find(j);>// Find representative of set including j> > if> (irep === jrep) {> return>;>// Elements are already in the same set> }> > let irank =>this>.rank[irep];>// Rank of set including i> let jrank =>this>.rank[jrep];>// Rank of set including j> > if>

(irank  this.parent[irep] = jrep; // Make j's representative parent of i's representative  } else if (jrank  this.parent[jrep] = irep; // Make i's representative parent of j's representative  } else {  this.parent[irep] = jrep; // Make j's representative parent of i's representative  this.rank[jrep]++; // Increment the rank of the resulting set  }>

Union etter størrelse:

Igjen, vi trenger en ny rekke med heltall kalt størrelse[] . Størrelsen på denne matrisen er den samme som den overordnede matrisen Foreldre[] . Hvis jeg er en representant for et sett, størrelse[i] er antallet av elementene i treet som representerer settet.
Nå forener vi to trær (eller sett), la oss kalle dem venstre og høyre, så i dette tilfellet avhenger alt av størrelse på venstre og størrelse på høyre tre (eller sett).

Hvis størrelsen på venstre er mindre enn størrelsen på Ikke sant , da er det best å flytte venstre under høyre og øke størrelsen på høyre med størrelse på venstre. På samme måte, hvis størrelsen på høyre er mindre enn størrelsen på venstre, bør vi flytte til høyre under venstre. og øke størrelsen på venstre med størrelsen på høyre.
Hvis størrelsene er like, spiller det ingen rolle hvilket tre som går under det andre.

C++

// Unites the set that includes i and the set> // that includes j by size> > #include> using> namespace> std;> > void> unionBySize(>int> i,>int> j) {> > >// Find the representatives (or the root nodes)> >// for the set that includes i> >int> irep = find(i);> > >// And do the same for the set that includes j> >int> jrep = find(j);> > >// Elements are in the same set, no need to> >// unite anything.> >if> (irep == jrep)> >return>;> > >// Get the size of i’s tree> >int> isize = Size[irep];> > >// Get the size of j’s tree> >int> jsize = Size[jrep];> > >// If i’s size is less than j’s size> >if>

(isize     // Then move i under j   Parent[irep] = jrep;     // Increment j's size by i's size   Size[jrep] += Size[irep];   }     // Else if j’s size is less than i’s size   else {     // Then move j under i   Parent[jrep] = irep;     // Increment i's size by j's size   Size[irep] += Size[jrep];   }  }>

Java

// Java program for the above approach> import> java.util.Arrays;> > class> UnionFind {> > >private> int>[] Parent;> >private> int>[] Size;> > >public> UnionFind(>int> n)> >{> >// Initialize Parent array> >Parent =>new> int>[n];> >for> (>int> i =>0>

; i   Parent[i] = i;   }     // Initialize Size array with 1s   Size = new int[n];   Arrays.fill(Size, 1);   }     // Function to find the representative (or the root   // node) for the set that includes i   public int find(int i)   {   if (Parent[i] != i) {   // Path compression: Make the parent of i the   // root of the set   Parent[i] = find(Parent[i]);   }   return Parent[i];   }     // Unites the set that includes i and the set that   // includes j by size   public void unionBySize(int i, int j)   {   // Find the representatives (or the root nodes) for   // the set that includes i   int irep = find(i);     // And do the same for the set that includes j   int jrep = find(j);     // Elements are in the same set, no need to unite   // anything.   if (irep == jrep)   return;     // Get the size of i’s tree   int isize = Size[irep];     // Get the size of j’s tree   int jsize = Size[jrep];     // If i’s size is less than j’s size   if (isize   // Then move i under j   Parent[irep] = jrep;     // Increment j's size by i's size   Size[jrep] += Size[irep];   }   // Else if j’s size is less than i’s size   else {   // Then move j under i   Parent[jrep] = irep;     // Increment i's size by j's size   Size[irep] += Size[jrep];   }   }  }    public class GFG {     public static void main(String[] args)   {   // Example usage   int n = 5;   UnionFind unionFind = new UnionFind(n);     // Perform union operations   unionFind.unionBySize(0, 1);   unionFind.unionBySize(2, 3);   unionFind.unionBySize(0, 4);     // Print the representative of each element after   // unions   for (int i = 0; i   System.out.println('Element ' + i   + ': Representative = '  + unionFind.find(i));   }   }  }    // This code is contributed by Susobhan Akhuli>

Python3

# Python program for the above approach> class> UnionFind:> >def> __init__(>self>, n):> ># Initialize Parent array> >self>.Parent>=> list>(>range>(n))> > ># Initialize Size array with 1s> >self>.Size>=> [>1>]>*> n> > ># Function to find the representative (or the root node) for the set that includes i> >def> find(>self>, i):> >if> self>.Parent[i] !>=> i:> ># Path compression: Make the parent of i the root of the set> >self>.Parent[i]>=> self>.find(>self>.Parent[i])> >return> self>.Parent[i]> > ># Unites the set that includes i and the set that includes j by size> >def> unionBySize(>self>, i, j):> ># Find the representatives (or the root nodes) for the set that includes i> >irep>=> self>.find(i)> > ># And do the same for the set that includes j> >jrep>=> self>.find(j)> > ># Elements are in the same set, no need to unite anything.> >if> irep>=>=> jrep:> >return> > ># Get the size of i’s tree> >isize>=> self>.Size[irep]> > ># Get the size of j’s tree> >jsize>=> self>.Size[jrep]> > ># If i’s size is less than j’s size> >if>

isize   # Then move i under j   self.Parent[irep] = jrep     # Increment j's size by i's size   self.Size[jrep] += self.Size[irep]   # Else if j’s size is less than i’s size   else:   # Then move j under i   self.Parent[jrep] = irep     # Increment i's size by j's size   self.Size[irep] += self.Size[jrep]    # Example usage  n = 5 unionFind = UnionFind(n)    # Perform union operations  unionFind.unionBySize(0, 1)  unionFind.unionBySize(2, 3)  unionFind.unionBySize(0, 4)    # Print the representative of each element after unions  for i in range(n):   print('Element {}: Representative = {}'.format(i, unionFind.find(i)))    # This code is contributed by Susobhan Akhuli>

C#

using> System;> > class> UnionFind> {> >private> int>[] Parent;> >private> int>[] Size;> > >public> UnionFind(>int> n)> >{> >// Initialize Parent array> >Parent =>new> int>[n];> >for> (>int>

i = 0; i   {   Parent[i] = i;   }     // Initialize Size array with 1s   Size = new int[n];   for (int i = 0; i   {   Size[i] = 1;   }   }     // Function to find the representative (or the root node) for the set that includes i   public int Find(int i)   {   if (Parent[i] != i)   {   // Path compression: Make the parent of i the root of the set   Parent[i] = Find(Parent[i]);   }   return Parent[i];   }     // Unites the set that includes i and the set that includes j by size   public void UnionBySize(int i, int j)   {   // Find the representatives (or the root nodes) for the set that includes i   int irep = Find(i);     // And do the same for the set that includes j   int jrep = Find(j);     // Elements are in the same set, no need to unite anything.   if (irep == jrep)   return;     // Get the size of i’s tree   int isize = Size[irep];     // Get the size of j’s tree   int jsize = Size[jrep];     // If i’s size is less than j’s size   if (isize   {   // Then move i under j   Parent[irep] = jrep;     // Increment j's size by i's size   Size[jrep] += Size[irep];   }   // Else if j’s size is less than i’s size   else  {   // Then move j under i   Parent[jrep] = irep;     // Increment i's size by j's size   Size[irep] += Size[jrep];   }   }  }    class Program  {   static void Main()   {   // Example usage   int n = 5;   UnionFind unionFind = new UnionFind(n);     // Perform union operations   unionFind.UnionBySize(0, 1);   unionFind.UnionBySize(2, 3);   unionFind.UnionBySize(0, 4);     // Print the representative of each element after unions   for (int i = 0; i   {   Console.WriteLine($'Element {i}: Representative = {unionFind.Find(i)}');   }   }  }>

Javascript

unionbysize(i, j) {> >let irep =>this>.find(i);>// Find the representative of the set containing i.> >let jrep =>this>.find(j);>// Find the representative of the set containing j.> > >if> (irep === jrep) {> >return>;>// Elements are already in the same set.> >}> > >let isize =>this>.size[irep];>// Size of the set including i.> >let jsize =>this>.size[jrep];>// Size of the set including j.> > >if>

(isize   // If i's size is less than j's size, make i's representative   // a child of j's representative.   this.parent[irep] = jrep;   this.size[jrep] += this.size[irep]; // Increment j's size by i's size.   } else {   // If j's size is less than or equal to i's size, make j's representative   // a child of i's representative.   this.parent[jrep] = irep;   this.size[irep] += this.size[jrep]; // Increment i's size by j's size.   if (isize === jsize) {   // If sizes are equal, increment the rank of i's representative.   this.rank[irep]++;   }   }   }>

Produksjon

Element 0: Representative = 0 Element 1: Representative = 0 Element 2: Representative = 2 Element 3: Representative = 2 Element 4: Representative = 0>

Tidskompleksitet : O(log n) uten Path Compression.

Nedenfor er den komplette implementeringen av usammenhengende sett med banekomprimering og forening etter rang.

C++

// C++ implementation of disjoint set> > #include> using> namespace> std;> > class> DisjSet {> >int> *rank, *parent, n;> > public>:> > >// Constructor to create and> >// initialize sets of n items> >DisjSet(>int> n)> >{> >rank =>new> int>[n];> >parent =>new> int>[n];> >this>->n = n;> >makeSet();> >}> > >// Creates n single item sets> >void> makeSet()> >{> >for> (>int>

i = 0; i   parent[i] = i;   }   }     // Finds set of given item x   int find(int x)   {   // Finds the representative of the set   // that x is an element of   if (parent[x] != x) {     // if x is not the parent of itself   // Then x is not the representative of   // his set,   parent[x] = find(parent[x]);     // so we recursively call Find on its parent   // and move i's node directly under the   // representative of this set   }     return parent[x];   }     // Do union of two sets by rank represented   // by x and y.   void Union(int x, int y)   {   // Find current sets of x and y   int xset = find(x);   int yset = find(y);     // If they are already in same set   if (xset == yset)   return;     // Put smaller ranked item under   // bigger ranked item if ranks are   // different   if (rank[xset]   parent[xset] = yset;   }   else if (rank[xset]>rang[ysett]) { overordnet[ysett] = xsett;   } // Hvis rangeringene er de samme, øk // rangeringen.   else { forelder[ysett] = xsett;   rang[xsett] = rang[xsett] + 1;   } } };    // Driver Code int main() { // Function Call DisjSet obj(5);   obj.Union(0, 2);   obj.Union(4, 2);   obj.Union(3, 1);     if (obj.finn(4) == obj.finn(0)) cout<< 'Yes
';   else  cout << 'No
';   if (obj.find(1) == obj.find(0))   cout << 'Yes
';   else  cout << 'No
';     return 0;  }>

Java

// A Java program to implement Disjoint Set Data> // Structure.> import> java.io.*;> import> java.util.*;> > class> DisjointUnionSets {> >int>[] rank, parent;> >int> n;> > >// Constructor> >public> DisjointUnionSets(>int> n)> >{> >rank =>new> int>[n];> >parent =>new> int>[n];> >this>.n = n;> >makeSet();> >}> > >// Creates n sets with single item in each> >void> makeSet()> >{> >for> (>int> i =>0>

; i   // Initially, all elements are in   // their own set.   parent[i] = i;   }   }     // Returns representative of x's set   int find(int x)   {   // Finds the representative of the set   // that x is an element of   if (parent[x] != x) {   // if x is not the parent of itself   // Then x is not the representative of   // his set,   parent[x] = find(parent[x]);     // so we recursively call Find on its parent   // and move i's node directly under the   // representative of this set   }     return parent[x];   }     // Unites the set that includes x and the set   // that includes x   void union(int x, int y)   {   // Find representatives of two sets   int xRoot = find(x), yRoot = find(y);     // Elements are in the same set, no need   // to unite anything.   if (xRoot == yRoot)   return;     // If x's rank is less than y's rank   if (rank[xRoot]     // Then move x under y so that depth   // of tree remains less   parent[xRoot] = yRoot;     // Else if y's rank is less than x's rank   else if (rank[yRoot]     // Then move y under x so that depth of   // tree remains less   parent[yRoot] = xRoot;     else // if ranks are the same   {   // Then move y under x (doesn't matter   // which one goes where)   parent[yRoot] = xRoot;     // And increment the result tree's   // rank by 1   rank[xRoot] = rank[xRoot] + 1;   }   }  }    // Driver code  public class Main {   public static void main(String[] args)   {   // Let there be 5 persons with ids as   // 0, 1, 2, 3 and 4   int n = 5;   DisjointUnionSets dus =   new DisjointUnionSets(n);     // 0 is a friend of 2   dus.union(0, 2);     // 4 is a friend of 2   dus.union(4, 2);     // 3 is a friend of 1   dus.union(3, 1);     // Check if 4 is a friend of 0   if (dus.find(4) == dus.find(0))   System.out.println('Yes');   else  System.out.println('No');     // Check if 1 is a friend of 0   if (dus.find(1) == dus.find(0))   System.out.println('Yes');   else  System.out.println('No');   }  }>

Python3

# Python3 program to implement Disjoint Set Data> # Structure.> > class> DisjSet:> >def> __init__(>self>, n):> ># Constructor to create and> ># initialize sets of n items> >self>.rank>=> [>1>]>*> n> >self>.parent>=> [i>for> i>in> range>(n)]> > > ># Finds set of given item x> >def> find(>self>, x):> > ># Finds the representative of the set> ># that x is an element of> >if> (>self>.parent[x] !>=> x):> > ># if x is not the parent of itself> ># Then x is not the representative of> ># its set,> >self>.parent[x]>=> self>.find(>self>.parent[x])> > ># so we recursively call Find on its parent> ># and move i's node directly under the> ># representative of this set> > >return> self>.parent[x]> > > ># Do union of two sets represented> ># by x and y.> >def> Union(>self>, x, y):> > ># Find current sets of x and y> >xset>=> self>.find(x)> >yset>=> self>.find(y)> > ># If they are already in same set> >if> xset>=>=> yset:> >return> > ># Put smaller ranked item under> ># bigger ranked item if ranks are> ># different> >if> self>.rank[xset] <>self>.rank[yset]:> >self>.parent[xset]>=> yset> > >elif> self>.rank[xset]>>self>.rank[yset]:> >self>.parent[yset]>=> xset> > ># If ranks are same, then move y under> ># x (doesn't matter which one goes where)> ># and increment rank of x's tree> >else>:> >self>.parent[yset]>=> xset> >self>.rank[xset]>=> self>.rank[xset]>+> 1> > # Driver code> obj>=> DisjSet(>5>)> obj.Union(>0>,>2>)> obj.Union(>4>,>2>)> obj.Union(>3>,>1>)> if> obj.find(>4>)>=>=> obj.find(>0>):> >print>(>'Yes'>)> else>:> >print>(>'No'>)> if> obj.find(>1>)>=>=> obj.find(>0>):> >print>(>'Yes'>)> else>:> >print>(>'No'>)> > # This code is contributed by ng24_7.>

C#

// A C# program to implement> // Disjoint Set Data Structure.> using> System;> > class> DisjointUnionSets> {> >int>[] rank, parent;> >int> n;> > >// Constructor> >public> DisjointUnionSets(>int> n)> >{> >rank =>new> int>[n];> >parent =>new> int>[n];> >this>.n = n;> >makeSet();> >}> > >// Creates n sets with single item in each> >public> void> makeSet()> >{> >for> (>int>

i = 0; i   {   // Initially, all elements are in   // their own set.   parent[i] = i;   }   }     // Returns representative of x's set   public int find(int x)   {   // Finds the representative of the set   // that x is an element of   if (parent[x] != x)   {     // if x is not the parent of itself   // Then x is not the representative of   // his set,   parent[x] = find(parent[x]);     // so we recursively call Find on its parent   // and move i's node directly under the   // representative of this set   }   return parent[x];   }     // Unites the set that includes x and   // the set that includes x   public void union(int x, int y)   {   // Find representatives of two sets   int xRoot = find(x), yRoot = find(y);     // Elements are in the same set,   // no need to unite anything.   if (xRoot == yRoot)   return;     // If x's rank is less than y's rank   if (rank[xRoot]     // Then move x under y so that depth   // of tree remains less   parent[xRoot] = yRoot;     // Else if y's rank is less than x's rank   else if (rank[yRoot]     // Then move y under x so that depth of   // tree remains less   parent[yRoot] = xRoot;     else // if ranks are the same   {   // Then move y under x (doesn't matter   // which one goes where)   parent[yRoot] = xRoot;     // And increment the result tree's   // rank by 1   rank[xRoot] = rank[xRoot] + 1;   }   }  }    // Driver code  class GFG  {   public static void Main(String[] args)   {   // Let there be 5 persons with ids as   // 0, 1, 2, 3 and 4   int n = 5;   DisjointUnionSets dus =   new DisjointUnionSets(n);     // 0 is a friend of 2   dus.union(0, 2);     // 4 is a friend of 2   dus.union(4, 2);     // 3 is a friend of 1   dus.union(3, 1);     // Check if 4 is a friend of 0   if (dus.find(4) == dus.find(0))   Console.WriteLine('Yes');   else  Console.WriteLine('No');     // Check if 1 is a friend of 0   if (dus.find(1) == dus.find(0))   Console.WriteLine('Yes');   else  Console.WriteLine('No');   }  }    // This code is contributed by Rajput-Ji>

Javascript

class DisjSet {> >constructor(n) {> >this>.rank =>new> Array(n);> >this>.parent =>new> Array(n);> >this>.n = n;> >this>.makeSet();> >}> > >makeSet() {> >for> (let i = 0; i <>this>.n; i++) {> >this>.parent[i] = i;> >}> >}> > >find(x) {> >if> (>this>.parent[x] !== x) {> >this>.parent[x] =>this>.find(>this>.parent[x]);> >}> >return> this>.parent[x];> >}> > >Union(x, y) {> >let xset =>this>.find(x);> >let yset =>this>.find(y);> > >if> (xset === yset)>return>;> > >if> (>this>.rank[xset] <>this>.rank[yset]) {> >this>.parent[xset] = yset;> >}>else> if> (>this>.rank[xset]>>this>.rank[yset]) {> >this>.parent[yset] = xset;> >}>else> {> >this>.parent[yset] = xset;> >this>.rank[xset] =>this>.rank[xset] + 1;> >}> >}> }> > // usage example> let obj =>new> DisjSet(5);> obj.Union(0, 2);> obj.Union(4, 2);> obj.Union(3, 1);> > if> (obj.find(4) === obj.find(0)) {> >console.log(>'Yes'>);> }>else> {> >console.log(>'No'>);> }> if> (obj.find(1) === obj.find(0)) {> >console.log(>'Yes'>);> }>else> {> >console.log(>'No'>);> }>

Produksjon

Yes No>

Tidskompleksitet : O(n) for å lage n enkeltelementsett. De to teknikkene -banekomprimering med foreningen etter rang/størrelse, vil tidskompleksiteten nå nesten konstant tid. Det viser seg at finalen amortisert tidskompleksitet er O(α(n)), der α(n) er den inverse Ackermann-funksjonen, som vokser veldig jevnt (den overskrider ikke engang for n<10⁶⁰⁰omtrent).

Plass kompleksitet: O(n) fordi vi trenger å lagre n elementer i Disjoint Set Data Structure.

Hva er en disjoint sett datastruktur?

Finn om x og y tilhører samme gruppe eller ikke, dvs. for å finne om x og y er direkte/indirekte venner.

Datastrukturer som brukes er:

Operasjoner på usammenhengende datastrukturer:

1. Finn:

C++

Java

Python3

C#

Javascript

2. Union:

C++

Java

Python3

C#

Javascript

Optimaliseringer (sammenslåing etter rangering/størrelse og banekomprimering):

Banekomprimering (Endringer for å finne()):

C++

Java

Python3

C#

Javascript

Union etter rang :

C++

Java

Python3

C#

Javascript

Union etter størrelse:

C++

Java

Python3

C#

Javascript

Nedenfor er den komplette implementeringen av usammenhengende sett med banekomprimering og forening etter rang.

C++

Java

Python3

C#

Javascript